As a computer user, it takes a little bit of work to keep your system free from adware and spyware. It is important to take these security measures however, because you will be protecting all of the private information you choose to store on your PC. This sensitive information may include passwords, personal documents, and sometimes even credit card numbers. These three tips will help you to ensure that you are never the victim of an adware or spyware problem.
Tip # 1 – Be Skeptical Of Every Download This may seem like common sense, but sometimes we think nothing of downloading programs that we find online for our personal use. The most notorious types of spyware and adware are programs that are offered online for free. This can include programs such as games, music files, and screensavers. These programs are free for a reason! They are used to generate pop-up ads and can even hijack your internet capabilities by directing your browser to bring you to websites you did not even want to go to.
Tip # 2 – Keep Your Windows Software Up-To-Date The updates offered by Windows includes a variety of security fixes to ensure your PC is not vulnerable to certain adware and spyware programs. The updates are offered for free from Microsoft.
Tip # 3 – Purchase and Install Spyware Protection Software Even spyware and adware cleaners that are offered for free online do not fully protect your system. Although the free spyware cleaners can be a temporary solution, many spyware and adware programs are written to re-install themselves later. The spyware protection software that can be purchased is better because it is specifically designed to locate and permanently disable all spyware, malware, and adware before they can attack your computer. Keeping your computer free of spyware will ensure the safety of your data as well as keep your PC functioning properly
Tuesday, February 10, 2009
The Basics of Data Recovery
When the words “data recovery” come to someone’s mind, the associated imagery usually consists of frustration spouted at the computer screen. In definitive terms, data recovery is the act of salvaging or restoring original data. The information may have been stored on various types of media, from CDs to the hard drive of a computer – but through certain processes and malfunctions, the data may have been corrupt or physically damaged and inaccessible.
Understanding the dynamics of data storage
Data is most often stored on media such as hard disk drives, CDs, DVDs, and portable USB drives. Through improper storage, attacks from viruses, and computer infections, this data can become damaged or corrupted. In other cases, the data may have simply been deleted.
Many users will give up in these instances, believing their information is lost forever. In actuality, data can be recovered by implementing a variety of methods, with strategies that often depend on the original media. This action can be successfully performed by using hardware or a form of advanced software, both of which might require the assistance of trained professionals.
Recovering Media Data
As mentioned above, this procedure can be applied to many aspects and different media. Recovering data for media used with an optical drive is often as easy as fixing a few nicks and scratches on a CD. You can find many available products at your local computer store that are strictly intended for this purpose. Sealing the nicks or smoothing over the scratches can be sufficient to enable the detection of data that was once inaccessible due to physical damage.
The difficulties overcoming data loss on a hard drive
Data errors are more complicated to troubleshoot on a hard drive. The loss of this information may be the result of physical, mechanical, or logical failures. Sometimes the problem may stem from an internal circuit board that is not functioning properly. When the issue becomes so severe that you are constantly losing data, the solution is indeed out of your hands. It is definitely time to call in a technician to diagnosis your machine - this problem may be more serious than you previously thought.
If the organs of your computer are working fine, the important data lost can usually be recovered. This is because files are not completely erased when you delete them. Instead, an entry in the computer’s index is deleted. This merely points to where the file is truly located. The actual file often remains untouched and sits in the registry. Location of the file can be unknowingly overwritten and misplaced by normal activity on the computer. This is the very reason why attempting to recover data on your own could be a bad idea.
The good thing is that an entire hard drive can never be completely erased. This means that any data that you have deleted can usually be recovered at a later time. Reinstalling or formatting an operating system also will not remove data beyond the point of recovery, even though the partition may have been written over.
How to effectively recover data without a technician
Restoring data on a hard drive works best when performed by reliable software. There are many programs available for restoring your important information, ranging from free to expensive. One of the leading data recovery software program is Stellar Phoenix data recovery too, ParetoLogic Data Recovery & PC Tools File Recover which happens to be very affordable and highly effective. This software has the ability to recover a wide range of data, from files that have been compressed and encrypted to those that have been emptied in the Recycle Bin. It also has the power to retrieve missing files from a variety of external storage devices.
The best way for you to tackle data recovery is to prepare for a mishap. Routine manual backups of your files combined with a reliable program will have you back up and running in no time when problems arise
Understanding the dynamics of data storage
Data is most often stored on media such as hard disk drives, CDs, DVDs, and portable USB drives. Through improper storage, attacks from viruses, and computer infections, this data can become damaged or corrupted. In other cases, the data may have simply been deleted.
Many users will give up in these instances, believing their information is lost forever. In actuality, data can be recovered by implementing a variety of methods, with strategies that often depend on the original media. This action can be successfully performed by using hardware or a form of advanced software, both of which might require the assistance of trained professionals.
Recovering Media Data
As mentioned above, this procedure can be applied to many aspects and different media. Recovering data for media used with an optical drive is often as easy as fixing a few nicks and scratches on a CD. You can find many available products at your local computer store that are strictly intended for this purpose. Sealing the nicks or smoothing over the scratches can be sufficient to enable the detection of data that was once inaccessible due to physical damage.
The difficulties overcoming data loss on a hard drive
Data errors are more complicated to troubleshoot on a hard drive. The loss of this information may be the result of physical, mechanical, or logical failures. Sometimes the problem may stem from an internal circuit board that is not functioning properly. When the issue becomes so severe that you are constantly losing data, the solution is indeed out of your hands. It is definitely time to call in a technician to diagnosis your machine - this problem may be more serious than you previously thought.
If the organs of your computer are working fine, the important data lost can usually be recovered. This is because files are not completely erased when you delete them. Instead, an entry in the computer’s index is deleted. This merely points to where the file is truly located. The actual file often remains untouched and sits in the registry. Location of the file can be unknowingly overwritten and misplaced by normal activity on the computer. This is the very reason why attempting to recover data on your own could be a bad idea.
The good thing is that an entire hard drive can never be completely erased. This means that any data that you have deleted can usually be recovered at a later time. Reinstalling or formatting an operating system also will not remove data beyond the point of recovery, even though the partition may have been written over.
How to effectively recover data without a technician
Restoring data on a hard drive works best when performed by reliable software. There are many programs available for restoring your important information, ranging from free to expensive. One of the leading data recovery software program is Stellar Phoenix data recovery too, ParetoLogic Data Recovery & PC Tools File Recover which happens to be very affordable and highly effective. This software has the ability to recover a wide range of data, from files that have been compressed and encrypted to those that have been emptied in the Recycle Bin. It also has the power to retrieve missing files from a variety of external storage devices.
The best way for you to tackle data recovery is to prepare for a mishap. Routine manual backups of your files combined with a reliable program will have you back up and running in no time when problems arise
Top 5 Signs That Your Registry Is Damaged
The number one reason why computers suffer computer stroke (you recognize this at the ominous blue screen of death) is not because of viruses or spyware. It is because we never bothered to repair our registry, the most important part in maintaining a healthy, fast PC. There are signs that your registry needs immediate repair, some subtle, some not so subtle. Including that blue screen of death, the virtual Mr. Reaper. Scary. Do you know these signs by heart? Here are the top five signs of a damaged registry.
1. Slow, sluggish performance. If you notice your computer performing slower and slower, your registry is corrupted. Over time, file data gets scattered, damaging your computer and causing to perform poorly. To remedy this problem, repair it with a cleanup tool.
2. Constant error messages. Yes, you have Windows, you will run into error messages. With that said, if error messages pop up every single time you use your computer, your registry is damaged. Repair it to fix the errors.
3. Continuous freezing. If your PC continuously freezes, say every start up or so, your registry is damaged. To solve this problem, simply repair it.
4. Continuous crashes. Having frequent crashes? Although it could be a virus, it could also be a damaged registry. You know what comes next. To fix it, repair it.
5. Sluggish startups. If your computer is slow when starting up, it is a tell-tale sign of a very, very damaged registry. You know what to do to - fix it. If you experience of these signs, repair it with a cleanup tool such as RegCure. It is available for free download on our website, Quick PC Solutions. Simply install, run, and have it analyze the data. If there are any errors, our recommended registry cleaners will clean it up for you. Simple as pie
1. Slow, sluggish performance. If you notice your computer performing slower and slower, your registry is corrupted. Over time, file data gets scattered, damaging your computer and causing to perform poorly. To remedy this problem, repair it with a cleanup tool.
2. Constant error messages. Yes, you have Windows, you will run into error messages. With that said, if error messages pop up every single time you use your computer, your registry is damaged. Repair it to fix the errors.
3. Continuous freezing. If your PC continuously freezes, say every start up or so, your registry is damaged. To solve this problem, simply repair it.
4. Continuous crashes. Having frequent crashes? Although it could be a virus, it could also be a damaged registry. You know what comes next. To fix it, repair it.
5. Sluggish startups. If your computer is slow when starting up, it is a tell-tale sign of a very, very damaged registry. You know what to do to - fix it. If you experience of these signs, repair it with a cleanup tool such as RegCure. It is available for free download on our website, Quick PC Solutions. Simply install, run, and have it analyze the data. If there are any errors, our recommended registry cleaners will clean it up for you. Simple as pie
Monday, February 9, 2009
Set the Security and Privacy IE 7
Internet Explorer 7 (IE7) offers a number of ways that you can browse the Internet safely. You can set the level of security and privacy in accordance with their needs.
OPEN INTERNET OPTIONS
1. IE7 provide flexibility in interacting with web pages, such as elements that want to see or blocked, cookies, ActiveX, pop-up; diprompt whether you want to do when an action, or simply done automatically, and add-on which you want to dienable or disable. The security and privacy we do IE7's Internet Options. To access them, click the Tools button on the right end of the toolbar and then select Internet Options at the bottom of the menu.
SET LEVEL security
2. When the Internet Options window appears, click the Security tab. Here you can set the security level of IE7 when browsing the Internet. Select the Internet zone and then drag slidebar to the desired security level: High, Medium-high or Medium. To find out the details of the settings for each option, click the Custom level button.
Set security details
3. Now you can set your browser security level to enable, disable, or prompt option on the Settings box, for example you want to automatically download the ActiveX controls that have not been marked or automatically download the file. IE7 will highlight the options that are considered unsafe. To return to the default settings of the security level, click the Reset button. If not, click OK, and then click Yes as Configuration confirmation.
PRIVACY SET LEVEL
4. Next, click the Privacy tab. Here you can change your browser's privacy settings. Click the Sites button to determine which sites may store cookies on your computer and the site which should not be.
SELECT SITE
5. That site can not save the cookies on your computer, enter its web address and then click the button block. Same, so that sites can store cookies on your computer, such as your online banking, type its web address and then click Allow. You can delete the site from the list by selecting the site and then click Remove. Click OK.
Set COOKIES (1)
6. You can set the privacy of the cookies from the web. Click the Advanced button and check ([1]) Override automatic cookie handling. Then select whether you want to Block, Allow, Prompt, or the first party cookies (placed by the site host) and third-party cookies (placed by advertisers). You can also give a check ([1]) Always allow session cookies to store login data sites and delete them when the browser is closed. Click OK.
Set COOKIES (2)
7. more you can set the privacy of the cookies by clicking the Default button on the Privacy tab. Here, you can use the slider bar to set the privacy level, starting from Block All Cookies (block third party cookies and first party cookies particular) to Accept All Cookies.
Turn on the pop-up blocker
8. After the cookies set, you can start to set up a pop-up. Check ([1]) Turn on Pop-up Blocker in the bottom of the Privacy tab and then click the Settings button.
Set the pop-up blocker
9. you can allow pop-ups from a site with the address webnya and then click Add or to block pop-ups from a site by selecting the site from the list and then click Remove. You can issue a sound when a pop-up blocked and set the filter level of pop-ups, ranging from Low (allow pop-ups from sites you trust) to High (to block all pop-up). Click Close.
Set Display POP-UP (1)
10. Similar to the browsing that you can use the tab, you can specify whether to open the IE pop-up on the new tab or new window. Click the General tab in the Internet Options window and then click the Settings button in the Tabs.
Set Display POP-UP (2)
11. In the Tabbed Browsing Settings window appears, in the When a pop-up is encountered, select whether the pop-up window is opened in a new window, new tab, or Internet Explorer to determine. In the below you can also set whether links from other programs open in new tab, new window, or in the tab or window now. Click OK.
Set ADD-ON (1)
12. Next, you can check the add-on is installed on your computer and ensure that no element of suspicious or who does not want to enable on-the IE7. Click the Programs tab, and then at the bottom of the Internet Options window, click the Manage add-ons.
Set ADD-ON (2)
13. from the menu at the top of the dialog box window Manage Add-ons, select the Add-ons that have been used by Internet Explorer. You will see a list of add-ons are installed on the box below, along with publisher information add-on that status, and type of file. If there are any suspicious items or unwanted in-enable, select the name and then click the Disable option at the bottom of the window.
Set the ActiveX
14. You can check the ActiveX control is installed in the same way. From the Show menu, select Downloaded ActiveX Controls (32-bit). Click the name of the ActiveX control is not desired or that may be dangerous, and then click the Delete key on the lower right corner to delete it from your system. Click OK to close the Manage Add-ons. You may need me to restart the computer to apply changes.
Set RSS Feed
15. Finally, you can set the frequency to check IE7 RSS feeds for updates. Click the Content tab and then click the Settings button in the Feeds section. Check ([1]) Automatically check feeds for updates and then select the time interval from the menu. You can also use the Advanced option to mark feeds as read, the feed-reading browser view, and remove the sound when there is a new feed. Click OK as rmasi Configuration and then click OK again to close the Internet Options window.
OPEN INTERNET OPTIONS
1. IE7 provide flexibility in interacting with web pages, such as elements that want to see or blocked, cookies, ActiveX, pop-up; diprompt whether you want to do when an action, or simply done automatically, and add-on which you want to dienable or disable. The security and privacy we do IE7's Internet Options. To access them, click the Tools button on the right end of the toolbar and then select Internet Options at the bottom of the menu.
SET LEVEL security
2. When the Internet Options window appears, click the Security tab. Here you can set the security level of IE7 when browsing the Internet. Select the Internet zone and then drag slidebar to the desired security level: High, Medium-high or Medium. To find out the details of the settings for each option, click the Custom level button.
Set security details
3. Now you can set your browser security level to enable, disable, or prompt option on the Settings box, for example you want to automatically download the ActiveX controls that have not been marked or automatically download the file. IE7 will highlight the options that are considered unsafe. To return to the default settings of the security level, click the Reset button. If not, click OK, and then click Yes as Configuration confirmation.
PRIVACY SET LEVEL
4. Next, click the Privacy tab. Here you can change your browser's privacy settings. Click the Sites button to determine which sites may store cookies on your computer and the site which should not be.
SELECT SITE
5. That site can not save the cookies on your computer, enter its web address and then click the button block. Same, so that sites can store cookies on your computer, such as your online banking, type its web address and then click Allow. You can delete the site from the list by selecting the site and then click Remove. Click OK.
Set COOKIES (1)
6. You can set the privacy of the cookies from the web. Click the Advanced button and check ([1]) Override automatic cookie handling. Then select whether you want to Block, Allow, Prompt, or the first party cookies (placed by the site host) and third-party cookies (placed by advertisers). You can also give a check ([1]) Always allow session cookies to store login data sites and delete them when the browser is closed. Click OK.
Set COOKIES (2)
7. more you can set the privacy of the cookies by clicking the Default button on the Privacy tab. Here, you can use the slider bar to set the privacy level, starting from Block All Cookies (block third party cookies and first party cookies particular) to Accept All Cookies.
Turn on the pop-up blocker
8. After the cookies set, you can start to set up a pop-up. Check ([1]) Turn on Pop-up Blocker in the bottom of the Privacy tab and then click the Settings button.
Set the pop-up blocker
9. you can allow pop-ups from a site with the address webnya and then click Add or to block pop-ups from a site by selecting the site from the list and then click Remove. You can issue a sound when a pop-up blocked and set the filter level of pop-ups, ranging from Low (allow pop-ups from sites you trust) to High (to block all pop-up). Click Close.
Set Display POP-UP (1)
10. Similar to the browsing that you can use the tab, you can specify whether to open the IE pop-up on the new tab or new window. Click the General tab in the Internet Options window and then click the Settings button in the Tabs.
Set Display POP-UP (2)
11. In the Tabbed Browsing Settings window appears, in the When a pop-up is encountered, select whether the pop-up window is opened in a new window, new tab, or Internet Explorer to determine. In the below you can also set whether links from other programs open in new tab, new window, or in the tab or window now. Click OK.
Set ADD-ON (1)
12. Next, you can check the add-on is installed on your computer and ensure that no element of suspicious or who does not want to enable on-the IE7. Click the Programs tab, and then at the bottom of the Internet Options window, click the Manage add-ons.
Set ADD-ON (2)
13. from the menu at the top of the dialog box window Manage Add-ons, select the Add-ons that have been used by Internet Explorer. You will see a list of add-ons are installed on the box below, along with publisher information add-on that status, and type of file. If there are any suspicious items or unwanted in-enable, select the name and then click the Disable option at the bottom of the window.
Set the ActiveX
14. You can check the ActiveX control is installed in the same way. From the Show menu, select Downloaded ActiveX Controls (32-bit). Click the name of the ActiveX control is not desired or that may be dangerous, and then click the Delete key on the lower right corner to delete it from your system. Click OK to close the Manage Add-ons. You may need me to restart the computer to apply changes.
Set RSS Feed
15. Finally, you can set the frequency to check IE7 RSS feeds for updates. Click the Content tab and then click the Settings button in the Feeds section. Check ([1]) Automatically check feeds for updates and then select the time interval from the menu. You can also use the Advanced option to mark feeds as read, the feed-reading browser view, and remove the sound when there is a new feed. Click OK as rmasi Configuration and then click OK again to close the Internet Options window.
Increase IE7 With IE7Pro
It took five years for Microsoft to issue a new version of Internet Explorer. When finally released, IE7 is still a lack of features compared to many neighborhood rival Mozilla Firefox. Fortunately, there is IE7Pro to complete the missing elements.
DOWNLOAD AND INSTALLATION
Download and install add-on (http://www.ie7pro.com) and then restart Internet Explorer. IE7Pro automatically activate the following modules: Basic Function, Ad Blocker, Scripts & Plugins, Spell checker, Auto Form Filter, Mini Download Manager, Privacy Cleaner, Online Service, Inline Search, and FasterIE. You can adjust the settings or their men-disable any that are not needed from the Tools menu, and select IE7Pro Preferences.
Crash Recovery Switch
You can activate or turn off the module from the ba-gian Modules. Click to view the module deskripsinya. If separate, then view tour Crash Recovery (all the tabs that open when you crash will be back) now dimasuk-in module to a Basic Function. Select the Find box or tool IE7Pro Inline Search with a check mark ([1]) Inline Search. Settings in the IE, IE7 menu bar is missing can be displayed by clicking the right at any empty space on the toolbar and select Menu Bar. Top Menu will move the IE menu bar above the address bar.
Check Spelling
IE7Pro comes with integrated check your spelling. To use the spelling talker, check ([1]) Spell checker in the Modules. For example you are to comment on a news site, IE7Pro will be down (in red) at the wrong word. Right-click the underlined word to select an appropriate word. Dictionary of American English is the default. Click Spell Languages, Dictionary, Add to download the other dictionary.
On Block
Ad Blocker is enabled by default, but you can also activate the 'flash blocking' so that the content is written in flash is not displayed. You can filter material by entering the Web site to a secure White list of suspicious sites and to the block list. To do so, type the site name in the box to the Rule and select 'Filter type'. Another way to block the ad is to right click on the IE7Pro icon on the bottom of the browser window.
Save As Images
IE7Pro also have facilities of image display (screenshot) that you can use to take the entire web page and then save it in PNG image format, GIF, JPG, TIFF, or BMP. Right click IE7Pro icon in the bottom of the browser window, select Save Current Tab As Image To, and then click Files or whether the Clipboard.
Set Mouse Movement
With Mouse gestures, you can control the browser by moving the mouse in a certain direction. For example, holding the right mouse button and a movement letter L will close the current tab open. You can change the color impression that is displayed during the movement, see the form of a movement that is available and create your own.
Run the Add Script
Users in the Scripts section, you can run the script directly change the look and behavior of Web pages. Select the script you want and click OK to run it. For example, it is the script eg 'Download Videos from YouTube'. Now when you see the video on YouTube Download link will appear Games. Click Save, and name fi le with the extension '. Flv'. You can run a file with drag and drop in VLC Player (http://www.videolan.org/vlc)
DOWNLOAD AND INSTALLATION
Download and install add-on (http://www.ie7pro.com) and then restart Internet Explorer. IE7Pro automatically activate the following modules: Basic Function, Ad Blocker, Scripts & Plugins, Spell checker, Auto Form Filter, Mini Download Manager, Privacy Cleaner, Online Service, Inline Search, and FasterIE. You can adjust the settings or their men-disable any that are not needed from the Tools menu, and select IE7Pro Preferences.
Crash Recovery Switch
You can activate or turn off the module from the ba-gian Modules. Click to view the module deskripsinya. If separate, then view tour Crash Recovery (all the tabs that open when you crash will be back) now dimasuk-in module to a Basic Function. Select the Find box or tool IE7Pro Inline Search with a check mark ([1]) Inline Search. Settings in the IE, IE7 menu bar is missing can be displayed by clicking the right at any empty space on the toolbar and select Menu Bar. Top Menu will move the IE menu bar above the address bar.
Check Spelling
IE7Pro comes with integrated check your spelling. To use the spelling talker, check ([1]) Spell checker in the Modules. For example you are to comment on a news site, IE7Pro will be down (in red) at the wrong word. Right-click the underlined word to select an appropriate word. Dictionary of American English is the default. Click Spell Languages, Dictionary, Add to download the other dictionary.
On Block
Ad Blocker is enabled by default, but you can also activate the 'flash blocking' so that the content is written in flash is not displayed. You can filter material by entering the Web site to a secure White list of suspicious sites and to the block list. To do so, type the site name in the box to the Rule and select 'Filter type'. Another way to block the ad is to right click on the IE7Pro icon on the bottom of the browser window.
Save As Images
IE7Pro also have facilities of image display (screenshot) that you can use to take the entire web page and then save it in PNG image format, GIF, JPG, TIFF, or BMP. Right click IE7Pro icon in the bottom of the browser window, select Save Current Tab As Image To, and then click Files or whether the Clipboard.
Set Mouse Movement
With Mouse gestures, you can control the browser by moving the mouse in a certain direction. For example, holding the right mouse button and a movement letter L will close the current tab open. You can change the color impression that is displayed during the movement, see the form of a movement that is available and create your own.
Run the Add Script
Users in the Scripts section, you can run the script directly change the look and behavior of Web pages. Select the script you want and click OK to run it. For example, it is the script eg 'Download Videos from YouTube'. Now when you see the video on YouTube Download link will appear Games. Click Save, and name fi le with the extension '. Flv'. You can run a file with drag and drop in VLC Player (http://www.videolan.org/vlc)
Sunday, February 8, 2009
Optimize your PC Performance with a Registry cleaner
HOW COMPUTER PERFORMANCE IS EFFECTED
Unknown to most, every little thing you do on a computer takes a tremendous toll. This includes the constant installing and removing of programs, storing your music or spending time on the internet. These activities leave scattered file fragments in your registry, even when you think they have been removed by performing a full uninstall. As time elapses the performance of your computer suffers. You will find yourself the victim of constant freezing, Internet Explorer messages or even the fearful blue screen.
A malicious virus will certainly affect computer performance. These system infections are relative to the biological form in the way they pass from one unit to the next. Viruses are very similar to spyware programs. Viruses will litter your computer screen with pop-up ads, collect your private information or change the configuration settings of your system. Both viruses and spyware are very hazardous and are sure to have a devastating effect the performance of your computer.
HOW TO OPTIMIZE YOUR COMPUTER
If your computer has been giving you slow and sluggish behavior, it is certainly time to optimize. By doing this you can maintain performance and keep it running like new. Here a few ways this may be performed:
* Remove unused programs: You can begin to optimize your computer by removing programs of no current relevance. Let’s just say your PC came equipped with a chess game. Later you find one on the internet and decide to use that instead. While getting enjoyment from your new program the old one remains on your system taking up space. It is more efficient to remove the old, unused program to clear up your hard drive.
* Perform frequent disk cleanup: The ‘disk cleanup’ function can be used through the ‘My Computer’ icon. By performing this action you can compress old system files, clear temporary internet files and those you may have left sitting in the recycle bin. By enabling this simple function you can free up a few gigabytes worth of space on the hard drive. I recommend doing this at least two times per month.
* Registry scanning software: This is perhaps the best method of optimizing your computer. Quality programs such as RegCure, Registry Mechanic & Registry Booster take an advanced approach towards maintaining performance. They allow you to conduct a quick and easy scan of your systems registry. Thereafter, it analyzes and performs the complicated repairs for you. They are fast and affordable, putting you one step closer towards fully optimizing your PC.
It does not matter if you paid an arm and a leg for your computer; in due time you are liable to experience performance issues. Following these tips is a great way to optimize your unit and keep things flowing smoothly.
Unknown to most, every little thing you do on a computer takes a tremendous toll. This includes the constant installing and removing of programs, storing your music or spending time on the internet. These activities leave scattered file fragments in your registry, even when you think they have been removed by performing a full uninstall. As time elapses the performance of your computer suffers. You will find yourself the victim of constant freezing, Internet Explorer messages or even the fearful blue screen.
A malicious virus will certainly affect computer performance. These system infections are relative to the biological form in the way they pass from one unit to the next. Viruses are very similar to spyware programs. Viruses will litter your computer screen with pop-up ads, collect your private information or change the configuration settings of your system. Both viruses and spyware are very hazardous and are sure to have a devastating effect the performance of your computer.
HOW TO OPTIMIZE YOUR COMPUTER
If your computer has been giving you slow and sluggish behavior, it is certainly time to optimize. By doing this you can maintain performance and keep it running like new. Here a few ways this may be performed:
* Remove unused programs: You can begin to optimize your computer by removing programs of no current relevance. Let’s just say your PC came equipped with a chess game. Later you find one on the internet and decide to use that instead. While getting enjoyment from your new program the old one remains on your system taking up space. It is more efficient to remove the old, unused program to clear up your hard drive.
* Perform frequent disk cleanup: The ‘disk cleanup’ function can be used through the ‘My Computer’ icon. By performing this action you can compress old system files, clear temporary internet files and those you may have left sitting in the recycle bin. By enabling this simple function you can free up a few gigabytes worth of space on the hard drive. I recommend doing this at least two times per month.
* Registry scanning software: This is perhaps the best method of optimizing your computer. Quality programs such as RegCure, Registry Mechanic & Registry Booster take an advanced approach towards maintaining performance. They allow you to conduct a quick and easy scan of your systems registry. Thereafter, it analyzes and performs the complicated repairs for you. They are fast and affordable, putting you one step closer towards fully optimizing your PC.
It does not matter if you paid an arm and a leg for your computer; in due time you are liable to experience performance issues. Following these tips is a great way to optimize your unit and keep things flowing smoothly.
Errors Related to Windows XP Registry
When Windows XP came out, it was intended to be the next step into the future. It took the problems and design flaws of Windows 2000 and Windows Me, and improved upon them, creating a better, more efficient operating system. And, for the most part PC users which had Windows XP installed on their system were pleased. So then, why are there so many errors on it now?
For instance, it seems like the older a computer gets the more slowdown it experiences. Why is this? The hardware in the computer does get any worse as time goes by, so why will it take several minutes for a program to run or an application to start? You defrag your hard drive every so often, have an adequate virus protection program and check your computer for spyware as often as possible. So what gives?
The Truth about Windows XP Errors
Some situations cause the inability of a .dll to work. .dll’s are some of the most important files in one’s PC and without certain .dll’s, the PC will fail to work properly or even work at all. This can even cause the dreaded runtime errors, which will crash whatever program they are attached to.
You might even be experiencing some shutdown and startup issues. Is it taking five minutes or more for your computer to startup? Or worse, will it never shut down? Problems like these are common faire within the PC world, sadly. And most people just accept that things are the way they are and are, unaware of the ways to fix them.
Most of a PC’s problems originate in one place – the registry. The registry inside a computer is the software component that dictates how the rest of the computer can run. Programs within the operating system and without rely on the computer’s registry for information on how to run. The registry also controls the basic functions of Windows XP. Without the registry working in proper condition, many and various computer errors can occur within Windows XP. Just a small error within the registry will create a larger error later on, and the worst part is, you won’t even be aware of where the error came from.
The registry is also the most confusing and complicated place. Your average computer user, or even many advanced computer users for that matter, would be unable to go into the registry and figure out which programs and files are good and which are bad. It would take a trained professional with years of experience to even think about going in there to fix things. In regards to this, Trojans and viruses typically target areas within the registry, knowing that it is so hard to fix, most people will be unable to correct the problem. Sometimes the registry is damaged even without malicious intent. All it takes is an improper installation or a poorly coded file to be placed in the registry for things to start falling apart.
Registry Cleaners as a solution !
A robust and sophisticated Registry optimization software program is the best way to deal with problems relating to the registry. Trained professionals are far too expensive and inefficient. While a program can check your computer’s registry and fix it at any time you want.
For instance, it seems like the older a computer gets the more slowdown it experiences. Why is this? The hardware in the computer does get any worse as time goes by, so why will it take several minutes for a program to run or an application to start? You defrag your hard drive every so often, have an adequate virus protection program and check your computer for spyware as often as possible. So what gives?
The Truth about Windows XP Errors
Some situations cause the inability of a .dll to work. .dll’s are some of the most important files in one’s PC and without certain .dll’s, the PC will fail to work properly or even work at all. This can even cause the dreaded runtime errors, which will crash whatever program they are attached to.
You might even be experiencing some shutdown and startup issues. Is it taking five minutes or more for your computer to startup? Or worse, will it never shut down? Problems like these are common faire within the PC world, sadly. And most people just accept that things are the way they are and are, unaware of the ways to fix them.
Most of a PC’s problems originate in one place – the registry. The registry inside a computer is the software component that dictates how the rest of the computer can run. Programs within the operating system and without rely on the computer’s registry for information on how to run. The registry also controls the basic functions of Windows XP. Without the registry working in proper condition, many and various computer errors can occur within Windows XP. Just a small error within the registry will create a larger error later on, and the worst part is, you won’t even be aware of where the error came from.
The registry is also the most confusing and complicated place. Your average computer user, or even many advanced computer users for that matter, would be unable to go into the registry and figure out which programs and files are good and which are bad. It would take a trained professional with years of experience to even think about going in there to fix things. In regards to this, Trojans and viruses typically target areas within the registry, knowing that it is so hard to fix, most people will be unable to correct the problem. Sometimes the registry is damaged even without malicious intent. All it takes is an improper installation or a poorly coded file to be placed in the registry for things to start falling apart.
Registry Cleaners as a solution !
A robust and sophisticated Registry optimization software program is the best way to deal with problems relating to the registry. Trained professionals are far too expensive and inefficient. While a program can check your computer’s registry and fix it at any time you want.
Blue Screen Of Death - BSOD
The blue screen might as well be a red light. Stop. Your system has crashed and there’s nothing you can do about it. The blue screen or “blue screen of death” as it is unlovingly referred to, is a bright blue screen with white letters informing you, in the most ambiguous terms possible, that your computer is useless for the moment. The blue screen has given thousands of PC users immense amounts of frustration and rage.
At the time, the only option available to you is to restart the computer and pray to your deity of choice that nothing is permanently damaged. The keyboard and mouse become unusable, which makes the blue screen even more frustrating, because now you are unable take your anger out on them. The blue screen on startup or at any other time is an indication that no activity can be performed on your computer and your only possible recourse is the shut down the computer. This will, of course, lose any unsaved information you might have been processing.
The blue screen will also remain very vague on what the problem was exactly, using terms that a typical PC user wouldn’t have the slight bit of knowledge about, let alone those deemed as “technologically impaired”. Although you might not need it – the bright blue screen looks intimidating enough without having to explain to you how bad the situation is.
What causes this dreaded, although festively decorated, blue screen to appear?
A number of problems can lead you to the “blue screen of death,” but all of them involve your PC’s registry.
The registry on your PC is the storage unit of information on your computer. Your PC is constantly referring to the registry to be told how to perform tasks and programs. It is also the place where your PC will go to check the information about the programs and files on your computer. The registry is even the area that receives the most routine use in your computer, from program information to file components to hardware specifications. Think of it as your computer’s “brain”, the place where it goes to receive information and commands. The blue screen is simply a notification that something is wrong with the “brain”.
The registry is the place where everything can go wrong very quickly, leading to the appearance of the blue screen on startup. The information in the registry might be causing trouble due to misplaced or bad information. The bad information can sometimes cause a fatal error.
SOLUTION
The misplaced or bad information can easily be fixed either manually or automatically. To do so manually would require intense computer knowledge and the ability to sort the good information from the bad. To do so automatically would be easy and require a a good registry cleaner. Registry Cleaners will sort through the information in your computer’s registry for you, easily sifting through the information that is beneficial to your computer from the information that’s bringing you a blue screen. Registry Cleaners has helped many frustrated computer owners quickly and easily solve their registry problems
At the time, the only option available to you is to restart the computer and pray to your deity of choice that nothing is permanently damaged. The keyboard and mouse become unusable, which makes the blue screen even more frustrating, because now you are unable take your anger out on them. The blue screen on startup or at any other time is an indication that no activity can be performed on your computer and your only possible recourse is the shut down the computer. This will, of course, lose any unsaved information you might have been processing.
The blue screen will also remain very vague on what the problem was exactly, using terms that a typical PC user wouldn’t have the slight bit of knowledge about, let alone those deemed as “technologically impaired”. Although you might not need it – the bright blue screen looks intimidating enough without having to explain to you how bad the situation is.
What causes this dreaded, although festively decorated, blue screen to appear?
A number of problems can lead you to the “blue screen of death,” but all of them involve your PC’s registry.
The registry on your PC is the storage unit of information on your computer. Your PC is constantly referring to the registry to be told how to perform tasks and programs. It is also the place where your PC will go to check the information about the programs and files on your computer. The registry is even the area that receives the most routine use in your computer, from program information to file components to hardware specifications. Think of it as your computer’s “brain”, the place where it goes to receive information and commands. The blue screen is simply a notification that something is wrong with the “brain”.
The registry is the place where everything can go wrong very quickly, leading to the appearance of the blue screen on startup. The information in the registry might be causing trouble due to misplaced or bad information. The bad information can sometimes cause a fatal error.
SOLUTION
The misplaced or bad information can easily be fixed either manually or automatically. To do so manually would require intense computer knowledge and the ability to sort the good information from the bad. To do so automatically would be easy and require a a good registry cleaner. Registry Cleaners will sort through the information in your computer’s registry for you, easily sifting through the information that is beneficial to your computer from the information that’s bringing you a blue screen. Registry Cleaners has helped many frustrated computer owners quickly and easily solve their registry problems
Saturday, February 7, 2009
Speed Up Internet Explorer (IE)
INTERNET EXPLORER Speed up STARTUP .
Isn't it annoying when you want to go to a new website, or any other site and you have to wait for your 'home' to load? This tweak tells Internet Explorer to simply 'run', without loading any webpages. (If you use a 'blank' page, that is still a page, and slows access. Notice the 'about:blank' in the address bar. The blank html page must still be loaded..). To load IE with 'nothing' [nothing is different than blank]:
1. Right-click on any shortcut you have to IE
[You should create a shortcut out of your desktop IE icon, and delete the original icon]
2. Click Properties
3. Add ' -nohome' [with a space before the dash] after the endquotes in the Target field.
4. Click OK
Fire up IE from your modified shortcut, and be amazed by how fast you are able to use IE!
INTERNET EXPLORER SPEED UP.
Edit your link to start Internet Explorer to have -nohome after it. For Example: "C:\Program Files\Internet Explorer\IEXPLORE.EXE" -nohome
This will load internet explorer very fast because it does not load a webpage while it is loading. If you want to go to your homepage after it is loaded, just click on the home button.
or
Open registry editor by going to Start then >> Run and entering >> regedit.
Once in registry, navigate to key.
HKEY_CURRENT_USER\Software\microsoft\Windows\CurrentVersion\InternetSettings. Right click @ windows right > New > DWORD.
Type MaxConnectionsPerServer > You can set value (the more higher the no, the more good speed u get, e;g : 99). [99 in hexa so 153 in binary]
Create another DWORD >type MaxConnectionsPer1_0Server. Then put a high value as mentioned above.
Restart I.E and you are done.
SPEED UP BROWSING WITH DNS trick.!!
When you connect to a web site your computer sends information back and forth, this is obvious. Some of this information deals with resolving the site name to an IP address, the stuff that tcp/ip really deals with, not words. This is DNS information and is used so that you will not need to ask for the site location each and every time you visit the site. Although WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall performance by increasing its size. You can do this with the registry entries below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
make a new text file and rename it to dnscache.reg. Then copy and paste the above into it and save it. Then merge it into the registry.
START Internet EXPLORER WITH EMPTY BLUE SCREEN.!!
Set your default page to about:mozilla and IE will show a nice blue screen upon startup.
FIX IE 6 SLOWDOWNS AND HANGS.
1. Open a command prompt window on the desktop (Start/Run/command).
2. Exit IE and Windows Explorer (iexplore.exe and explorer.exe, respectively, in Task Manager, i.e - Ctrl-Alt-Del/Task Manager/Processes/End Process for each).
3. Use the following command exactly from your command prompt window to delete the corrupt file:
C:\>del "%systemdrive%\Documents and Settings\%username%\Local
Settings\Temporary Internet Files\Content.IE5\index.dat"
4. Restart Windows Explorer with Task Manager (Ctrl-Alt-Del/Task Manager/Applications/New Task/Browse/C:\Windows\explorer.exe[or your path]) or Shutdown/Restart the computer from Task Manager.
SPEED UP WEB BROWSING.
Iv'e personally found a dramatic increase in web browsing after clearing the Windows XP DNS cache. To clear it type the following in a command prompt: ipconfig /flushdns.
ALLOW MORE THAN 2 SIMULTANEOUS DOWNLOADS ON IEXPLORER 6.
This is to increase the the number of max downloads to 10.
1. Start Registry Editor (Regedt32.exe).
2. Locate the following key in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
3. On the Edit menu, click Add Value , and then add the following registry values:
"MaxConnectionsPer1_0Server"=Dword:0000000a
"MaxConnectionsPerServer"=Dword:0000000a
4. Quit Registry Editor.
IPV6 INSTALLATION FOR WINDOWS XP.
This protocol is distined to replace the Internet Protocal Version 4 used by Internet Explorer it uses hexadecimal ip addresses instead of decimal example (decimal ip 62.98.231.67) (hexadecimal IP 2001:6b8:0:400::70c)
To install To install the IPv6 Protocol for Windows XP:
Log on to the computer running Windows XP with a user account that has local administrator privileges. Open a command prompt. From the Windows XP desktop, click Start, point to Programs, point to Accessories, and then click Command Prompt. At the command prompt, type: ipv6 install
For more information on IPv6, visit the site below:
CODEhttp://www.microsoft.com/windowsxp/pro/techinfo/administration/ipv6/default.asp
ANOTHER WAY TO FIX IEXPLORER 6 SLOW PAGES LOADED.
Here's an easier way to get to index.dat file as addresse in another tweak submitted here.
1. click on Internet Explorer
2. go to to your root dir (usually C:)
3. open Documents and Settings folder
4. open "your username folder"
5. open UserData
6. **close IE if you have it open**
rename index.dat to index.old
logoff and log back on (don't need to restart) open up IE and go to a web page or site that always seemed to load slowly. It should load a lot more quickly now. NOTE. Always rename or backup .dat or other system files before deleting.
Disable Right Click!!
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions]
"NoBrowserContextMenu"=dword:00000001
Enable Right Click!!
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions]
"NoBrowserContextMenu"=dword:00000000
do u want to save entire Page For offline viweing??
Saving Web Pages with Internet Explorer 6
Occasionally, you may want to save an entire Web page on your computer (text, hyperlinks, graphics, and all). To save the Web page that currently appears in Internet Explorer, choose File-->Save As to open the Save Web Page dialog box shown in the following figure. Select the folder in which you want the page saved and then click the Save button.
After saving a Web page on your hard drive, you can open it in Internet Explorer and view the contents even when you're not connected to the Internet. If your motive for saving the Web page, however, is to be able to view the content when you're not connected to the Internet, you're better off saving the page as a Favorite marked for offline viewing. That way, you can decide whether you want to view other pages linked to the one you're saving and you can have Internet Explorer check the site for updated content.
You can also e-mail a Web page or a link to the page to a colleague or friend. To send the current Web page in a new e-mail message, click File-->Send-->Page by E-mail on the Explorer menu bar and then fill out the new e-mail. To send a link to the page instead, click File-->Send-->Link by E-Mail. To create a desktop shortcut to the Web page, click File-->Send-->Shortcut to Desktop.
Alternate trick
Before performing these steps you need to test your broadband speed you can test your speed at http://www.2wire.com/
The broadband connection speed can be increased by clearing the route from modem to server. Number of packets sent by modem to server should be increased.Internet speed can be increased by increasing more number of incoming and outgoing packets.The main reason why your internet connection is slow is because of harmful virus.If your system is infected with virus your number of incomming packets will be decreased.This leads to your slower internet speed.Internet speed can be increased by by clearing the route to the server.
This can be done by upgrading costly sofwares and hardwares.This will optimize your system speed.And Increase your system speed.Internet tweak is the best software which increases your system speed for further applications.Another software Windows power tools which makes windows faster and increases your internet speed.And decreases downloading time.It optimizes LAN,CABLE,DSN etc.Another software "internet cyclone"which increases your internet speed from 64kbps to 120kbps. This tip is designed for increased BROADBAND speed in Windows XP while using standard Network Interface cards (NIC) that are connected to ADSL modems, or when using any directly-connected USB ADSL modem.
To speed up the Internet connection speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the NIC or the USB modem. This tip is only recommended if you have 256MB RAM or higher.
Step #1 - Identify the IRQ used by the NIC/USB modem
1. Open the System Information tool by running MSINFO32.EXE from the Run command.
2. Expand System Summary > Hardware Resources > IRQs.
3. Look for the listing made for your NIC (in my case - a Intel® PRO/100+ Management Adapter). Note the IRQ next to the specified line (in my case - IRQ21).
In case of USB modems you will first need to find the right USB device used by your modem. Follow these steps:
1. Open the Device Manager tool by running DEVMGMT.MSC from the Run command (or by right-clicking My Computer > Hardware tab > Device Manager button).
2. Scroll down to Universal Serial Bus controllers and expand it.
3. Right-click the USB Root Hub and select Properties. Note that you might need to do so for all listed USB Root hubs (if there are more than one) in order to find the right one.
4. In the Power tab, look for your USB ADSL modem.
5. In the Resources tab look for the assigned IRQ (in this case - IRQ21).
6. This is the IRQ we're looking for.
Note: IRQs and modem names might vary...
Step #2 - Modify the system.ini file
1. Run SYSEDIT.EXE from the Run command.
2. Expand the system.ini file window.
3. Scroll down almost to the end of the file till you find a line called [386enh].
4. Press Enter to make one blank line, and in that line type IRQX=4096 where X is the designated IRQ number we found in step #1, in my case it's IRQ21.
Note: This line IS CASE SENSITIVE!!!
5. Click on the File menu, then choose Save.
6. Close SYSEDIT and reboot your computer.
Done. Speed improvement will be noticed after the computer reboots.
Isn't it annoying when you want to go to a new website, or any other site and you have to wait for your 'home' to load? This tweak tells Internet Explorer to simply 'run', without loading any webpages. (If you use a 'blank' page, that is still a page, and slows access. Notice the 'about:blank' in the address bar. The blank html page must still be loaded..). To load IE with 'nothing' [nothing is different than blank]:
1. Right-click on any shortcut you have to IE
[You should create a shortcut out of your desktop IE icon, and delete the original icon]
2. Click Properties
3. Add ' -nohome' [with a space before the dash] after the endquotes in the Target field.
4. Click OK
Fire up IE from your modified shortcut, and be amazed by how fast you are able to use IE!
INTERNET EXPLORER SPEED UP.
Edit your link to start Internet Explorer to have -nohome after it. For Example: "C:\Program Files\Internet Explorer\IEXPLORE.EXE" -nohome
This will load internet explorer very fast because it does not load a webpage while it is loading. If you want to go to your homepage after it is loaded, just click on the home button.
or
Open registry editor by going to Start then >> Run and entering >> regedit.
Once in registry, navigate to key.
HKEY_CURRENT_USER\Software\microsoft\Windows\CurrentVersion\InternetSettings. Right click @ windows right > New > DWORD.
Type MaxConnectionsPerServer > You can set value (the more higher the no, the more good speed u get, e;g : 99). [99 in hexa so 153 in binary]
Create another DWORD >type MaxConnectionsPer1_0Server. Then put a high value as mentioned above.
Restart I.E and you are done.
SPEED UP BROWSING WITH DNS trick.!!
When you connect to a web site your computer sends information back and forth, this is obvious. Some of this information deals with resolving the site name to an IP address, the stuff that tcp/ip really deals with, not words. This is DNS information and is used so that you will not need to ask for the site location each and every time you visit the site. Although WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall performance by increasing its size. You can do this with the registry entries below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
make a new text file and rename it to dnscache.reg. Then copy and paste the above into it and save it. Then merge it into the registry.
START Internet EXPLORER WITH EMPTY BLUE SCREEN.!!
Set your default page to about:mozilla and IE will show a nice blue screen upon startup.
FIX IE 6 SLOWDOWNS AND HANGS.
1. Open a command prompt window on the desktop (Start/Run/command).
2. Exit IE and Windows Explorer (iexplore.exe and explorer.exe, respectively, in Task Manager, i.e - Ctrl-Alt-Del/Task Manager/Processes/End Process for each).
3. Use the following command exactly from your command prompt window to delete the corrupt file:
C:\>del "%systemdrive%\Documents and Settings\%username%\Local
Settings\Temporary Internet Files\Content.IE5\index.dat"
4. Restart Windows Explorer with Task Manager (Ctrl-Alt-Del/Task Manager/Applications/New Task/Browse/C:\Windows\explorer.exe[or your path]) or Shutdown/Restart the computer from Task Manager.
SPEED UP WEB BROWSING.
Iv'e personally found a dramatic increase in web browsing after clearing the Windows XP DNS cache. To clear it type the following in a command prompt: ipconfig /flushdns.
ALLOW MORE THAN 2 SIMULTANEOUS DOWNLOADS ON IEXPLORER 6.
This is to increase the the number of max downloads to 10.
1. Start Registry Editor (Regedt32.exe).
2. Locate the following key in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
3. On the Edit menu, click Add Value , and then add the following registry values:
"MaxConnectionsPer1_0Server"=Dword:0000000a
"MaxConnectionsPerServer"=Dword:0000000a
4. Quit Registry Editor.
IPV6 INSTALLATION FOR WINDOWS XP.
This protocol is distined to replace the Internet Protocal Version 4 used by Internet Explorer it uses hexadecimal ip addresses instead of decimal example (decimal ip 62.98.231.67) (hexadecimal IP 2001:6b8:0:400::70c)
To install To install the IPv6 Protocol for Windows XP:
Log on to the computer running Windows XP with a user account that has local administrator privileges. Open a command prompt. From the Windows XP desktop, click Start, point to Programs, point to Accessories, and then click Command Prompt. At the command prompt, type: ipv6 install
For more information on IPv6, visit the site below:
CODEhttp://www.microsoft.com/windowsxp/pro/techinfo/administration/ipv6/default.asp
ANOTHER WAY TO FIX IEXPLORER 6 SLOW PAGES LOADED.
Here's an easier way to get to index.dat file as addresse in another tweak submitted here.
1. click on Internet Explorer
2. go to to your root dir (usually C:)
3. open Documents and Settings folder
4. open "your username folder"
5. open UserData
6. **close IE if you have it open**
rename index.dat to index.old
logoff and log back on (don't need to restart) open up IE and go to a web page or site that always seemed to load slowly. It should load a lot more quickly now. NOTE. Always rename or backup .dat or other system files before deleting.
Disable Right Click!!
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions]
"NoBrowserContextMenu"=dword:00000001
Enable Right Click!!
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions]
"NoBrowserContextMenu"=dword:00000000
do u want to save entire Page For offline viweing??
Saving Web Pages with Internet Explorer 6
Occasionally, you may want to save an entire Web page on your computer (text, hyperlinks, graphics, and all). To save the Web page that currently appears in Internet Explorer, choose File-->Save As to open the Save Web Page dialog box shown in the following figure. Select the folder in which you want the page saved and then click the Save button.
After saving a Web page on your hard drive, you can open it in Internet Explorer and view the contents even when you're not connected to the Internet. If your motive for saving the Web page, however, is to be able to view the content when you're not connected to the Internet, you're better off saving the page as a Favorite marked for offline viewing. That way, you can decide whether you want to view other pages linked to the one you're saving and you can have Internet Explorer check the site for updated content.
You can also e-mail a Web page or a link to the page to a colleague or friend. To send the current Web page in a new e-mail message, click File-->Send-->Page by E-mail on the Explorer menu bar and then fill out the new e-mail. To send a link to the page instead, click File-->Send-->Link by E-Mail. To create a desktop shortcut to the Web page, click File-->Send-->Shortcut to Desktop.
Alternate trick
Before performing these steps you need to test your broadband speed you can test your speed at http://www.2wire.com/
The broadband connection speed can be increased by clearing the route from modem to server. Number of packets sent by modem to server should be increased.Internet speed can be increased by increasing more number of incoming and outgoing packets.The main reason why your internet connection is slow is because of harmful virus.If your system is infected with virus your number of incomming packets will be decreased.This leads to your slower internet speed.Internet speed can be increased by by clearing the route to the server.
This can be done by upgrading costly sofwares and hardwares.This will optimize your system speed.And Increase your system speed.Internet tweak is the best software which increases your system speed for further applications.Another software Windows power tools which makes windows faster and increases your internet speed.And decreases downloading time.It optimizes LAN,CABLE,DSN etc.Another software "internet cyclone"which increases your internet speed from 64kbps to 120kbps. This tip is designed for increased BROADBAND speed in Windows XP while using standard Network Interface cards (NIC) that are connected to ADSL modems, or when using any directly-connected USB ADSL modem.
To speed up the Internet connection speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the NIC or the USB modem. This tip is only recommended if you have 256MB RAM or higher.
Step #1 - Identify the IRQ used by the NIC/USB modem
1. Open the System Information tool by running MSINFO32.EXE from the Run command.
2. Expand System Summary > Hardware Resources > IRQs.
3. Look for the listing made for your NIC (in my case - a Intel® PRO/100+ Management Adapter). Note the IRQ next to the specified line (in my case - IRQ21).
In case of USB modems you will first need to find the right USB device used by your modem. Follow these steps:
1. Open the Device Manager tool by running DEVMGMT.MSC from the Run command (or by right-clicking My Computer > Hardware tab > Device Manager button).
2. Scroll down to Universal Serial Bus controllers and expand it.
3. Right-click the USB Root Hub and select Properties. Note that you might need to do so for all listed USB Root hubs (if there are more than one) in order to find the right one.
4. In the Power tab, look for your USB ADSL modem.
5. In the Resources tab look for the assigned IRQ (in this case - IRQ21).
6. This is the IRQ we're looking for.
Note: IRQs and modem names might vary...
Step #2 - Modify the system.ini file
1. Run SYSEDIT.EXE from the Run command.
2. Expand the system.ini file window.
3. Scroll down almost to the end of the file till you find a line called [386enh].
4. Press Enter to make one blank line, and in that line type IRQX=4096 where X is the designated IRQ number we found in step #1, in my case it's IRQ21.
Note: This line IS CASE SENSITIVE!!!
5. Click on the File menu, then choose Save.
6. Close SYSEDIT and reboot your computer.
Done. Speed improvement will be noticed after the computer reboots.
Install 2 Antivirus or more in 1 Computer
Appear several times a comment or question about what if we install Antivirus 2 or more in a single computer. Some of us may conclude that the computer will be more secure from viruses, and some others may give opinions that it is not necessary.
How should? whether we need to use 2 or more antivirus in a single computer? Here a little review on it. In fact, if not so required, is not recommended to install Antivirus 2 or more, except perhaps with a local antivirus that just to clean the virus only (manual scan). Antivirus vendor's own usually also recommend to use only one antivirus.
To be considered :
If you want to install 2 antivirus in one or more computers, have to consider several things such as:
Specification Computer, make sure the CPU and Memory (RAM) enough. We can see the need or the recommended minimum of each antiviral. If antivirus is not able to give a warning or do not match with certain antivirus, it should not be forced, which will be provided in a higher priority. And may also need to read the information / explanation of each antiviral.
Some Antivirus can walk along :
There are some antivirus which can sometimes run together in one computer and not so problematic, except perhaps the Memory / CPU is increased. From my experience alone, never try AVG Free Edition 7.5 for version 8.0 or 8.0 with the Free. Similarly when the Avast 4.8 Home Edition (Free). Never even tried to use third of them together and it does not cause problems to the system, but the computer will work very slow.
Similarly when trying to Rising avira antivirus free edition, can be run without problems on the system, also 10 Bit Defender Free Edition and Avira. but when I try Kaspersky 2009, could not be installed if you have Avira antivirus, possibly also with other antivirus. For other anti-antivirus has not been tried.
What if 2 Antivirus detects the same virus :
When there are 2 or more antivirus and installed on the computer, its possible to do and it is very possible. And sometimes this can cause problems, because if the virus is usually detected, antivirus will lock the virus (the file), so can not be accessed, run or even in the clear in the manual. May occur when antivirus try to delete or quarantine, it does not succeed / fail because the virus is locked by other antivirus.
Still want to install 2 Antivirus?
If you want to maintain the install 2antivirus or more, but worry will crash, error, conflict, and work computer so slow, we can do it with only one antivirus activate it. Mean? Each menu usually have antivirus that work on the computer monitor at any time, such as: Active guard, Real-time guard, Proactive defense, Resident shield, Resident Protection, and so forth. To prevent conflicts and reduce the burden on the computer can be done with only the features for only one antivirus. While other anti-virus turned off (not activated), so only used to perform scan manually if needed only. Or can also turn off the autorun feature to prevent or antivirus running automatically with windows, can be arranged through a program like Autoruns. There will be seen what the antivirus running when windows start (booting). But with the autorun just sometimes not enough, because the antivirus itself can activate the service through the windows (can be checked in the Control Panel> Administrative Tools> Services).
Experience is also important :
This may also be made in consideration of the experience of others who had to install 2 antivirus in one or more computers. If you have friends who use two or more antivirus please provide feedback / comments. Whether there have been a problem or not, so that it can complement each other and become a science for us
How should? whether we need to use 2 or more antivirus in a single computer? Here a little review on it. In fact, if not so required, is not recommended to install Antivirus 2 or more, except perhaps with a local antivirus that just to clean the virus only (manual scan). Antivirus vendor's own usually also recommend to use only one antivirus.
To be considered :
If you want to install 2 antivirus in one or more computers, have to consider several things such as:
Specification Computer, make sure the CPU and Memory (RAM) enough. We can see the need or the recommended minimum of each antiviral. If antivirus is not able to give a warning or do not match with certain antivirus, it should not be forced, which will be provided in a higher priority. And may also need to read the information / explanation of each antiviral.
Some Antivirus can walk along :
There are some antivirus which can sometimes run together in one computer and not so problematic, except perhaps the Memory / CPU is increased. From my experience alone, never try AVG Free Edition 7.5 for version 8.0 or 8.0 with the Free. Similarly when the Avast 4.8 Home Edition (Free). Never even tried to use third of them together and it does not cause problems to the system, but the computer will work very slow.
Similarly when trying to Rising avira antivirus free edition, can be run without problems on the system, also 10 Bit Defender Free Edition and Avira. but when I try Kaspersky 2009, could not be installed if you have Avira antivirus, possibly also with other antivirus. For other anti-antivirus has not been tried.
What if 2 Antivirus detects the same virus :
When there are 2 or more antivirus and installed on the computer, its possible to do and it is very possible. And sometimes this can cause problems, because if the virus is usually detected, antivirus will lock the virus (the file), so can not be accessed, run or even in the clear in the manual. May occur when antivirus try to delete or quarantine, it does not succeed / fail because the virus is locked by other antivirus.
Still want to install 2 Antivirus?
If you want to maintain the install 2antivirus or more, but worry will crash, error, conflict, and work computer so slow, we can do it with only one antivirus activate it. Mean? Each menu usually have antivirus that work on the computer monitor at any time, such as: Active guard, Real-time guard, Proactive defense, Resident shield, Resident Protection, and so forth. To prevent conflicts and reduce the burden on the computer can be done with only the features for only one antivirus. While other anti-virus turned off (not activated), so only used to perform scan manually if needed only. Or can also turn off the autorun feature to prevent or antivirus running automatically with windows, can be arranged through a program like Autoruns. There will be seen what the antivirus running when windows start (booting). But with the autorun just sometimes not enough, because the antivirus itself can activate the service through the windows (can be checked in the Control Panel> Administrative Tools> Services).
Experience is also important :
This may also be made in consideration of the experience of others who had to install 2 antivirus in one or more computers. If you have friends who use two or more antivirus please provide feedback / comments. Whether there have been a problem or not, so that it can complement each other and become a science for us
Subscribe to:
Posts (Atom)
